Effektpedaler

• 60W RMS
• Two Independent Channels with footswitchable control designed from the ground up to replicate the Tone AND feel ofthe Ironheart tube series.
• Channel 1 with Gain, Volume and Selectable Clean or Drive mode (Symmetric or Asymmetric)
• Channel 2 with Gain, Volume and switchable Bright, Natural and Dark voicing
• Built in Footswitchable Pre-Boost with level
• 3 Band Passive Tone Stack and Tone Control
• Digital SECRET-PATH Reverb with footswitchable control
• LA·IR High Quality Digital IR emulated balanced XLR Out with selectable FRFR, CAB A or CAB B and ground lift switch.
• Class Compliant Audio streaming via USB C socket @48kHz (Emulated and un-emulated main out twin stream)
• Ironheart-Connect APP allows loading your own custom IR's and firmware updates.
• Ironheart-Connect APP allows loading your own custom IR's and firmware updates.
• Comes loaded with 2 of Martin's custom IRs - created especially for the IRONHEART-LOUDPEDAL
• Midi In and Thru, with full size Midi connectors
• 6.3mm FX Loop (FX Send doubles as a none emulated line out)
• 3.5mm Stereo Aux In and 3.5mm Stereo Headphone Output (With Cabinet Emulation)
• 100-240V Universal Voltage, IEC C14, lead included

• Soundet som definerte arenarock i pedalform
• Krystallklare cleans, krispige overtoner og skimrende modulation
• Samme fire tone presets (to clean & to dirty) som i den opprinnelige hodetelefonforsterkeren
• Kompleks kompresjonskrets som er innstilt for en langsom release i "clean mode" och en rask release I "Dirty mode"
• Original bucket-brigade-chip for en stor og ekspansiv chorus
• Avanserte funksjoner inkluderer off-board switching, stereomodus og mye mere

• Based on Kirk’s own Cry Baby Rack Wah settings
• The same sound he used to revolutionize metal solos
• Thick top end with a full dynamic range
• Special edition yellow sparkle finish and custom tread

• Tailor-made for Ronson’s signature fixed-wah tones
• Carefully spec’d from his own wah pedal
• Custom inductor replicates higher frequency response and subtler peak
• Fast initial sweep with instant reactivity
• Distinctive EQ curve from period-accurate components
• Special finish inspired by Ronson’s monumental work

• A wide range of dynamic, touch-sensitive tones
• From thick, tubey overdrive to thunder-and-lightning distortion
• Simple three-knob control setup
• Special limited edition finish for 2025

• Two independent amplifiers that combine the authentic sounds of a Carsten'grace'and an LA100BL-'SUPERGROUP'
• 60W RMS High Power output
• 'grace' channel with volume, gain, bright. SUPERGROUP channel with Volume, Gain, DIMED & CLEAN modes
• Footswitchable Digital Reverb with control
• Footswitchable boost with status recall per channel
• Preloaded with two High Quality LA·IR Digital IRs including Billy Corgan's 'Live' cab capture
• Emulated balanced XLR Out with IR select and ground lift switches
• Class Compliant Audio streaming via USB C socket @48kHz (Emulated and unemulated main out twin stream)
• LA·IR App allows loading your own custom IRs and firmware updates
• MIDI In and Thru, with full size MIDI connectors
• 6.3mm Transformer Isolated FX Loop (FX Send doubles as a non-emulated line out)
• 3.5mm Stereo Aux In and 3.5mm Stereo Headphone Output (with Cabinet Emulation)
• USB Type C 1M CABLE

• Dual inputs with remote switching ability
• Independent FET and Tube channels with mix
• Remote drive & mute
• USB Type C for Class compliant audio streaming @48kHz (Emulated and un-emulated main out) and accessing LA·IR app
• LA.IR app for custom ir and firmware updates
• Bass, Lo-Middle (with switchable Q and operating Frequency), Hi-Mid, Treble.
• TILT
• Bypass/Mute mode - foot switchable
• Balanced Male XLR DI out with switchable Ground Lift and Source Mode switch - Pre, Post and LA·IR
• 3.5mm stereo Aux in jack
• FX Loop
• Tuner out
• LEDs for Bypass/Mute, Input 1/2 and Fet/Tube channels
• Regulated 9V-12V 500mA DC PSU Not Included: Centre Negative, 2.1 x 5.5 x 12mm connector type
• The DB-EAST-PRE is shipped with a set of IRs from Nathans favourite cabs – the DBV410 on input 1 and the DBV212 on input 2.

• Special limited edition finish inspired by the Berzerker’s tribute band Zakk Sabbath
• Custom built for Zakk’s relentless riffs and leads
• Simple three-knob layout so you can concentrate on kicking ass
• Transform your amp into a heavy, chunky crunch machine

• Transforms your signal into shimmering pads, glitched rhythms, and evolving textures
• Eight ready-to-play presets get you experimenting instantly, from regenerative octave loops to warbly polyphonic synth
• Three different modes—Delay, Auto-Freeze, and Layers—define how grains are sampled and replayed
• Size, Overlap, Pitch, Reverse, Delay, Regen, and Mix knobs allow you to sculpt every grain
• On-board reverb, filter, and vibrato FX add further depth and dimension
• Deep parameter tweaks unlock randomization, effect fine-tuning, and tap tempo
• Full stereo I/O with mono, wet/dry, and true stereo output options, plus expression pedal and MXR Split + Tap compatibility

• Recreates the original MXR rack unit in pedal form with authentic all-analog bucket-brigade devices
• Doubler button selects between sweeping classic jet-engine swoosh and thick dual-layered chorusing
• Full control set shapes everything from smooth, mellow coloration to aggressive, metallic resonance
• Mix knob blends wet and dry signals to taste, from fully dry to fully wet
• Invert switch reverses wet signal polarity for airy, hollow vocality or bold low-mid punch
• CV In and Out jacks connect with synths, sequencers, and CV-capable expression pedals

• 3-trinns kompressor

• Transparent og enkel å bruke

• Made in UK

• Oktavpedal i studiokvalitet

• En ekstra oktav opp, to ned eller en perfekt femte

• Klassiske subs til massive synth-lignende akkorder

• Made in the UK

• Distortion-pedal for basister

• 3 steg - DIST 1, DIST 2 & OVERDRIVE

• Klassisk, diskret och varm

• Made in UK